This section briefly describes how to install and start KX-TDA Maintenance Console on a PC which is connected to the PBX via USB. Browse for and select the KX-TDA USB driver, which is copied to the local drive during installation.

Password Security A password is required to perform programming for security purposes. Do not disclose the password. This will avoid unauthorized access and possible dial through fraud. Warning to the Administrator regarding the system password 1.

Please inform the customer of the importance of the password and the possible dangers. Please maintain the secrecy of the password. This will avoid unauthorized access and possible dial through fraud. Please change the password periodically. We strongly recommend that a password of 10 digits is used for maximum protection against hackers. If the system password is forgotten, you can examine the backup of the system programming. • If you have a backup system data, you can find the password by loading the backup system data onto the PC and check the password using the programming tool.

As for a backup system data, refer to '. • If you do not have a backup system data, you have to set the PBX to the factory default and reprogram it. Therefore, we recommend to save a backup system data. Starting the KX-TDA Maintenance Console and Assigning the Basic Items (Quick Setup) When you start the KX-TDA Maintenance Console with the Installer Level Programmer Code and connect to the Hybrid IP-PBX for the first time after initialization (with the factory default setting), Quick Setup will launch automatically. During Quick Setup, you will setup the following basic items: • Date and Time of the Hybrid IP-PBX. Firmware acer liquid z120 atau z2 phone. The date and time set on the PC will be used. • System Password for installer for PC programming.

• Operator extension numbers. Operator extensions for all time modes (day/lunch/break/night) can be assigned. • Flexible Numbering type to pattern 1 or pattern 2. If pattern 1 (with ) is selected, ' ' must prefix all feature numbers (except access numbers) when an extension user wants to use a feature. • Operator call and Idle Line Access/ARS numbers (0 or 9).

The feature numbers for operator call and Idle Line Access/ARS can be selected. • Remote Maintenance Dial Number. Enter the complete telephone number of the PBX (including the country code). When necessary, this number will be used to access the PBX from a remote location for maintenance purposes. Click ' Start' ' Programs' ' KX-TDA Maintenance Console' ' KX-TDA Maintenance Console'. Type the Installer Level Programmer Code (default: INSTALLER), then click [OK]. The Programmer Code authorizes different programming levels, and the Quick Setup is only available when you start the KX-TDA Maintenance Console with Installer Level Programmer Code.

Note There are 2 other Programmer Codes with limited authorization: Administrator Level (default: ADMIN), and User Level (default: USER). Click ' Connect' ' USB' from the menu bar. Note To connect with USB, you need to have installed the KX-TDA USB driver.

Follow the instructions of the wizard to install the KX-TDA USB driver. Type the system password for installer (default: 1234), then click [OK] to log-in. Follow the instructions of the wizard and assign the basic items (Quick Setup). The program menu appears. During a long programming session, it is highly recommended that you periodically save the system data to the SD Memory Card.

You can think of system data as stored in RAM, whereas SD Memory Card as stored on a hard disk. If the PBX undergoes a sudden power failure or system reset for some reason, all the system data will be lost. To save the system data to the SD Memory Card, (1) click ' SD Memory Backup' icon before resetting the PBX or turning off the power, or (2) exit the KX-TDA Maintenance Console so that the PBX starts automatically to save the system data. When the PBX is initialized, not all data is taken from the SD Memory Card. The data for present status of extension FWD/DND button is taken from battery backup memory in the PBX. There are characters that cannot be shown on the KX-T7600 series PT display, even when programmed in the KX-TDA Maintenance Console.

The KX-T7600 series PTs can only display the characters shown in the white cells in the following table. CAUTION Do not remove the SD Memory Card during access to it. Doing so will damage the system data, and in the worst case, damage the SD Memory Card. 3.3.2 Structure of the KX-TDA Maintenance Console. Menu Bar 3.3.3 Hybrid IP-PBX Configuration This section briefly describes how to check the configuration of the Hybrid IP-PBX using the KX-TDA Maintenance Console when PC and the Hybrid IP-PBX are connected by USB cable. For detailed descriptions of each feature and related PT programming, refer to the on-line help at each screen. Start the KX-TDA Maintenance Console (refer to ' in ').